1 Piece Saw Blade, Circular Milling, Cutting Disc, CNC Tool, Slot Machining, Tungsten Carbide Steel, Diameter 50-70MM, Metal Slot, 1 Piece(63mm-d16.0.8mm)

Saw blade (1 piece) NOTICE: Required to be used with the tool holder which is NOT INCLUDED in this link, please click on the image below to purchase if needed. Material: Overall combined with all-tungsten steel, cutting iron like mud, using special steel mesh mixed treatment, impact resistant, wear-resistant, high temperature resistance, long service life. Double sided mirror effect, good gloss. Overall leveling design, smooth surface, smooth and efficient cutting. Treatment: Accuracy: Inner hole--+0.01~0.02 Outdoor--±0.02 Sawing: Precision grinding processing of saw teeth, scientific angle design, sharp and smooth machining, no burn board, no roller edge, no burr. The thinner the saw blade, the more susceptible it is to vibration and tensile stress during use. If there is a radial runout or an axial runout, it is easy to cause damage. Bad. Therefore, the milling machine must operate in a stable state, that is, the machine tool has high precision, good cutting bar rigidity and stable transmission. Feed quantity per tooth Constant and sufficient cooling. Specific requirements are: <;0.03mm, axial runway 0.01mm. 2. As long as the milling depth of the cutter is not affected, tighten both sides of the blade on the cutting rod as much as possible with a large flange plate, in order to eliminate vibration and avoid side compression. Generally, the diameter of the flange plate is not less than 1/3 of the outer diameter of the saw blade. 3. Reasonable linear milling speed Vc and lead Sz per tooth should be selected. Generally, under the same conditions, the whole hard alloy saw blade cutter can choose Vc faster than the high-speed steel saw blade cutter, but the feed rate per tooth should be lower than the feed rate of high-speed steel. Sz can generally be set between 0.005 and 0.025/tooth. Specific parameters should be determined by the user based on the speed of the milling machine, milling properties, thickness, number of teeth, milling depth and other factors are determined. Vc: p:70~150, 50~80 K : 80~120 M: 70 ~ 120 N:200~350 s:20~18 Outer Diameter - Cutting Depth 40mm-3mm 50mm-- 5mm 63mm-8mm 70mm-10mm 75mm-12mm 80mm-15mm 100mm--20mm 125mm--30mm ========== Chemical of High Concern: None is_customized: Yes Origin: Mainland China Finish: White Model Number: Sawmill Blade Material: Tungsten Carbide Steel Size: 40mm Number of pieces: 1 piece Blade Type: Circular Saw Blades Usage: Commercial Manufacturing Teeth: 72

• Size: 50-70 mm
• Number of pieces: 1 piece
• Blade Type: Circular Saw Blades
• Usage: Commercial Manufacturing
• Teeth: 72